Author Topic: IAC Fouga tails  (Read 2446 times)

0 Members and 1 Guest are viewing this topic.

Offline Fouga23

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • www.fougamagister.be
IAC Fouga tails
« on: January 15, 2011, 05:58:56 pm »
Just noticed something on this image:
http://www.irishairpics.com/photo/1005344/L/Fouga-CM170-Super-Magister/220/Irish-Air-Corps/?&sid=&sp=
What are the 2 small extensions at the tip of the tails? Never seen those before.
Belgian Air Force Fouga Magister
www.fougamagister.be

Offline Claudel Hopson

  • Sr. Member
  • ****
  • Posts: 323
    • View Profile
Re: IAC Fouga tails
« Reply #1 on: January 15, 2011, 08:07:41 pm »
They are mass balances. They are fixed weights which help the pilot to move the control surfaces. Other aircraft of the era also have them, normally shaped like a tear drop and underneath the control surface, or on more modern aircraft like a small extension beyond the control surface leading edge

Or are you talking about the two static dischargers on the trailing edges?
« Last Edit: January 15, 2011, 08:11:16 pm by Claudel Hopson »

Offline Fouga23

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • www.fougamagister.be
Re: IAC Fouga tails
« Reply #2 on: January 15, 2011, 08:46:43 pm »
The static dischargers. When were the IAC Fouga's modified  with that? Do they all have them? Anyone with a closeup picture?
Belgian Air Force Fouga Magister
www.fougamagister.be

Offline Machlooper

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: IAC Fouga tails
« Reply #3 on: January 15, 2011, 11:52:40 pm »
If it's the bits on the trailing edges you mean then yes, they are static dischargers. They are braided pieces  of wire frayed at the end which where simply screwed(or riveted, cant remember?) on via a solid bracket attached to the braid.
« Last Edit: January 15, 2011, 11:54:43 pm by Machlooper »

Offline Fouga23

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • www.fougamagister.be
Re: IAC Fouga tails
« Reply #4 on: January 16, 2011, 08:55:24 am »
So when did the IAC modify their Fouga's with this? And what was the reason?
Belgian Air Force Fouga Magister
www.fougamagister.be

Offline Tony Kearns

  • Hero Member
  • *****
  • Posts: 856
    • View Profile
Re: IAC Fouga tails
« Reply #5 on: January 16, 2011, 08:39:18 pm »
Hi Tim,
I am attaching a pic taken in the 1980's of the Swallows, I cannot make out anything on 220 at that time, there is somethimng on the port rudder of 217 though. Will have to check further.
Tony K

Offline Machlooper

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: IAC Fouga tails
« Reply #6 on: January 16, 2011, 09:25:53 pm »
Tony, if you look at the right(left as you look at it)  elevator/rudder of 220 you will see the two dischargers behind the counter balance!

Offline Fouga23

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • www.fougamagister.be
Re: IAC Fouga tails
« Reply #7 on: January 16, 2011, 10:03:28 pm »
Interesting picture, thanks! There indeed seems to be one on 220's tail. I really hope to find a good picture of them. This is one weird mod for a Fouga!
Belgian Air Force Fouga Magister
www.fougamagister.be

Offline Machlooper

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: IAC Fouga tails
« Reply #8 on: January 21, 2011, 06:05:05 pm »
Fouga23 your wish is my command,

Yes, they are on both sides!


L/H side:






R/H side:


CLose up top(L/H side inboard):


Close up bottom (L/H side outboard):


 :airforce_grin:


Offline Claudel Hopson

  • Sr. Member
  • ****
  • Posts: 323
    • View Profile
Re: IAC Fouga tails
« Reply #9 on: January 21, 2011, 08:46:43 pm »
Hi Lads. Machlooper we must have passed each other outside the hangar after taking the pictures. I wont put up my ruddervator pics but the static dischargers are also on each aileron, pics of which are below, port and starboard respectively

Offline Machlooper

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: IAC Fouga tails
« Reply #10 on: January 21, 2011, 09:40:51 pm »
I had to use the secret entrance  :airforce_wink:
« Last Edit: January 21, 2011, 10:05:21 pm by Machlooper »

Fouga

  • Guest
Re: IAC Fouga tails
« Reply #11 on: January 21, 2011, 10:06:53 pm »
Hi Tim,
I am attaching a pic taken in the 1980's of the Swallows, I cannot make out anything on 220 at that time, there is somethimng on the port rudder of 217 though. Will have to check further.
Tony K

That is a brilliant shot. Can I re-post it over on Boards.ie? Memories.. :-(

Offline Tony Kearns

  • Hero Member
  • *****
  • Posts: 856
    • View Profile
Re: IAC Fouga tails
« Reply #12 on: January 22, 2011, 12:00:13 am »
Fouga, It is an Air Corps picture and is copyright, OK?
Tony K

Offline Machlooper

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: IAC Fouga tails
« Reply #13 on: January 22, 2011, 12:41:14 am »
Quote
Fouga, It is an Air Corps picture and is copyright, OK?

And I'll rat on ye to the lad who took it!!  :airforce_laugh:

Offline Fouga23

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • www.fougamagister.be
Re: IAC Fouga tails
« Reply #14 on: January 22, 2011, 11:16:15 am »
Wow! Thanks guys! Superb pictures! Don't suppose anyone knows why the IAC modified their Fouga's with these? Did they have problems with static electricity?
Belgian Air Force Fouga Magister
www.fougamagister.be